+86 183 5026 5271
Smart Lightning Monitoring &Warning System
T03-A6 Lightning Data Logger
Product Features
● Compliant with IEC 61643-11;
● High-energy zinc oxide varistor core with exceptional discharge current capacity
● Ultra-fast response time
● Compact integrated design
● Visual red flag failure indication
● Thermal-controlled overheat tripping mechanism, interlocked with the red flag indicator
● CQC Certification
Scope of Application
● Able to record the peak value, number, time and polarity of lightning multi-pulse current;
● Recording interval is up to 20ms;
● Able to send lightning strike information to the data center via RS485, TCP/IP or 4G;
● High lightning strike response sensitivity, small threshold and large range;
● The sensor adopts winding process design and has high acquisition accuracy;
● Open-type sensor is easy to install;
Technical Specifications
| Model | T03-B3 |
| Working voltage | 12VDC |
| Power consumption | <2W |
| Current measurement range | ±(2~250) kA |
| Sampling rate | 1.5M |
| Trigger mode | Channel voltage signal trigger |
| Working mode | Continuous work |
| Communication interface | RS485 |
| Data storage | MCU external FLASH storage |
| Recording duration | 1000ms |
| Working temperature and humidity | -25℃ ~ +55℃ ; 5%~95%RH |
| Storage temperature and humidity | -25℃ ~ +55℃ ; 5%~95%RH |
| Enclosure protection level | IP20 |
| Product dimensions (mm) | 2079.581 |
| Sensor dimensions (mm) | 997022 ( Note: The sensor center ring is Ø26 ) |
| Installation method | 35mm rail |
| Model | T03-A6 |
| Working voltage | 12VDC |
| Power consumption | <2W |
| Current measurement range | ±(2~250) kA |
| Measurement channel | 1 |
| Measurement information | Lightning current peak value, occurrence time, number, polarity |
| Measurement error | ±5% |
| Response speed | 1 time/1s |
| Data storage | RS485、TCP/IP or 4G |
| Number of records | 20 |
| Working temperature and humidity | -25℃ ~ +55℃ ; 5%~95%RH |
| Storage temperature and humidity | -25℃ ~ +55℃ ; 5%~95%RH |
| Enclosure protection level | IP20 |
| Product dimensions (mm) | 2079.581 |
| Sensor dimensions (mm) | 997022 ( Note: The sensor center ring is Ø26 ) |
| Installation method | 35mm rail |
Basic Circuit Diagram
Dimensions
Installation Instructions
Certificate
Document Download
Quality Inspection(Test reference)
1 Inspection Reference
IEC61643.11 Surge Protective Devices (SPD) for Low-Voltage Distribution Systems
Part 1: Performance Requirements and Test Methods
GB/T 2828.1-2012 Sampling Inspection Procedures
Part 1: Sampling Plans for Inspection by Acceptance Quality Limit (AQL)
2 Incoming Inspection
Incoming material inspection is conducted based on the "Metal Parts Inspection Standard," "Plastic Parts Inspection Standard," "Electronic Parts Inspection Standard," "Auxiliary Materials Inspection Standard," and the GB/T 2828.1-2012 Sampling Inspection Procedure.
3 Finished Products Inspection
1) Routine test
Routine inspection is a 100% inspection conducted at the final stage of production on products from the production line. After inspection, no further processing is done, except for packaging and labeling.
2) Sampling test
Sampling inspection is performed according to the GB/T 2828.1 sampling standard.
3) Acceptance test
Verification inspection is a sampling inspection conducted to ensure that the product continues to meet the standard requirements. Verification inspection should be carried out according to the procedures and frequency specified by the standard.
Inspection Table
|
Inspection Items |
Routine test |
Sampling test |
Acceptance test |
|
Packaging |
|
√ |
|
|
Appearance Quality |
√ |
√ |
√ |
|
Structure and Shape |
√ |
||
|
Remote Signal Alarm Function |
√ |
√ |
√ |
|
U1mA Value Test |
√ |
√ |
|
|
Markings and Labels |
√ |
√ |
√ |
|
Direct Contact Protection Test |
√ |
||
|
Standby Power Consumption and Residual Current |
√ |
||
|
Protection Level |
√ |
||
|
Action Load Test |
√ |
||
|
Thermal Stability Test |
√ |
√ |
|
|
Temporary Overvoltage (TOV) Test |
√ |
||
|
Mechanical Strength |
√ |
||
|
Insulation Resistance |
√ |
||
|
Dielectric Strength |
√ |
||
|
Environment, IP Code |
√ |
||
|
Electrical Clearance and Creepage Distance |
√ |
||
|
Resistance to Abnormal Heat and Flammability |
√ |
||
|
Status Indicator Operation |
√ |
√ |
√ |
|
Isolation Between Separate Circuits |
√ |
||
|
Transportation Vibration Test |
√ |
||
|
Free Fall Test |
√ |
||
|
Insertion and Withdrawal Force Test Before Surge Impulse (for Pluggable Modules) |
√ |
√ |
